White Wood Adhesive Glue for Wood Furniture Paper Leather Handcraft
Product Parameter
| Packaging specification | 14 kg/bucket |
| Model NO. | BPB-9188C |
| Brand | Popar |
| Level | Finish coat |
| Main raw material | PVA |
| Drying method | Air drying |
| Packaging mode | Plastic bucket |
| Application | Manual splicing of loose wood and oily bottom wood (such as fir, pine, eucalyptus, etc.) |
| Features | Strong penetration. Excellent water resistance . High temperature resistance. Impact resistance Curing .Speed Block Strong adhesion |
| Acceptance | OEM/ODM, Trade, Wholesale, Regional Agency |
| Payment method | T/T, L/C, PayPal |
| Certificate | ISO14001, ISO9001,French VOC a+ certification |
| Physical state | Liquid |
| Country of origin | Made in China |
| Production capacity | 250000 Ton/Year |
| Application method | Brush |
| MOQ | ≥20000.00 CYN (Min. Order) |
| pH value | 6-8 |
| Solid content | 50% |
| Viscosity | 20000-30000Pa.s |
| Stroge life | 2 years |
| Color | White |
| HS Code | 3506100090 |
Product Application
Product Description
Manual splicing of loose wood and oily bottom wood (such as fir, pine, eucalyptus, etc.)
Product Features
Strong penetration . Excellent water resistance . High temperature resistance. Impact resistance . Curing Speed Block. Strong adhesion.
Direction For Use
Product Instructions:1. The joint surface must be clean, dry. 2.Spreads the glue on the joint surface, presses till solidification, maintains for 24 hours under the room temperature to achieve the use intensity.
Application:Group A and Group B are mixed, glued and pressed, and then dried naturally.
Dosage : 1KG/7.5㎡
Points for Attention：
1. The air humidity is above 90%, and the temperature is below 5°C. It is not suitable for construction.
2. Before construction, it is necessary to check whether the board is smooth.
3. The amount of glue should be applied according to the standard, and it should not be too much or too little.
4. After the glue is applied to the board , pressurization must be balanced.
5. This product should be stored at 5°C-35°C. If the temperature is too low and the product freezes or thickens significantly, it should be transferred to a warm warehouse above 15°C and kept for more than 24 hours. If the viscosity returns to normal, it will not affect normal use. Vigorous heating should be avoided.This product should be kept airtight to prevent the surface of the glue from drying out. If the surface has dried and crusted, internal use will not be affected after removing the skin.
Storage life:
This product is a mixture. A small amount of water will be released on the surface after long-term storage, which is a normal phenomenon, and it will not affect the use after stirring evenly.
It can be stored for 24 months in sealed state in a cool ( 5°C-35°C) and dry place by keeping it away from freeze and direct sunlight.
Product construction steps
Product Display
