Water-Based Odorless 3 in 1 Interior Wall Paint

Tool Cleaning
Please use clean water to wash all utensils on time after stopping in the middle of painting and after painting.

Theoretical paint consumption
9.0-10 square meters/kg/single pass (dry film 30 microns), due to the roughness of the actual construction surface and the dilution ratio, the amount of paint consumption is also different.

Packaging specification
20KG

Storage method
Store in a cool and dry warehouse at 0°C-35°C, avoid rain and sun exposure, and strictly prevent frost. Avoid stacking too high.

Substrate treatment
When building a new wall, remove surface dust, greasy and loose plaster, and if there are pores, repair it in time to ensure that the wall is clean, dry and smooth.
First recoating the wall surface: eradicate the weak paint film on the old wall surface, remove the dust powder and impurities on the surface, flatten and polish it, clean it and dry it thoroughly.

Maintenance time
7 days/25°C, low temperature (not lower than 5°C) should be extended appropriately to obtain the ideal paint film effect.

Surface condition
The surface of the precoated substrate must be firm, dry, clean, smooth and free of loose matter.
Ensure that the surface humidity of the precoated substrate is less than 10% and the pH is less than 10.

Powdered surface
1. Remove the powdered coating from the surface as much as possible, and level it again with putty.
2. After the putty is dry, smooth with fine sandpaper and remove powder.

Moldy surface
1. Shovel with a spatula and sand with sandpaper to remove mildew.
2. Brush 1 time with appropriate mold washing water, and wash it with clean water in time, and let it dry completely.