Water-Based Interface Treatment Adhesive Agent For Concrete Structure
Product Parameter
| Packaging specification | 14kg /bucket |
| Model NO. | BPB-9004A |
| Brand | Popar |
| Level | Primer |
| Substrate | Concrete/Brick |
| Main raw material | Polymer |
| Drying method | Air drying |
| Packaging mode | Plastic bucket |
| Acceptance | OEM/ODM, Trade, Wholesale, Regional Agency |
| Payment method | T/T, L/C, PayPal |
| Certification | ISO14001, ISO9001 |
| Physical state | Liquid |
| Country of origin | Made in China |
| Production capacity | 250000 Ton/Year |
| Application method | Brush / Roller / Spray guns |
| MOQ | ≥20000.00 CYN (Min. Order) |
| pH value | 6-8 |
| Solid content | 9%±1 |
| Viscosity | 600-1000ku |
| Stroge life | 2 years |
| HS Code | 3506100090 |
Product Application
Product Description
Scope of application: It is suitable for interface coating treatment of concrete, aerated concrete, plastering layer and brick-concrete wall before scraping putty; it is suitable for interface reinforcement treatment before waterproof construction or brick-laying construction on loose sand and grey walls; applicable substrate napping on concrete or waterproof coatings.
Product Features
Convenient construction . Large painting area . Strong permeability . High bonding strength .Can also be used in wet environments. Environmental protection.
Direction For Use
How to use: Mix the liquid material with the powder material and stir evenly before use.
The product mix ratio is liquid: powder = 1:1.5 (mass ratio).
Points for attention :
1. The solidified slurry is difficult to remove. After the tool is used, it should be cleaned with water as soon as possible.
2. Ventilation must be strengthened, and natural maintenance is sufficient. After the slurry is hard-dried and the base surface is completely sealed, the subsequent process can be carried out.
3. The product should be stored in a cool and dry place, the temperature should not be lower than 5°C or higher than 40°C, and it should not be squeezed, tilted and stacked upside down.
4. The product is non-toxic and non-flammable, and its storage and transportation are handled as non-dangerous goods.
Product construction steps
Product Display
