Interior Wall Paint Water-Based Emulsion for Homedecor
Product Parameter
| Ingredients | Water ,water-based deodorizing emulsion, environmental pigment,environmental additive |
| Viscosity | 117Pa.s |
| pH value | 7.5 |
| Water resistance | 20000times |
| Theoretical coverage | 0.95 |
| Drying time | Surface dry in 2 hours, hard dry in about 24 hours. |
| Repainting time | 2 hours (based on dry film 30 microns, 25-30 ℃) |
| Solid content | 58% |
| Country of origin | Made in China |
| Brand No. | BPR-1305 |
| Proportion | 1.3 |
| Safety, Health and Environmental Instructions | Be sure to read the application instructions in the package text carefully before use to obtain a reliable and satisfactory coating effect. Try to open all doors and windows before starting operation and use them to ensure proper ventilation in the construction area. Allergic skin, please always wear protective equipment during use; if you accidentally contaminate your eyes, please rinse with plenty of water immediately and seek medical assistance. Do not let children or pets enter the construction area, and keep the product out of reach; if accidentally contaminated, rinse with plenty of water immediately and seek medical assistance. When the paint is overturned and leaking, cover it with sand or soil and collect and dispose of it properly. Do not pour paint into the sewer or drain. When disposing of paint waste, comply with local environmental standards. For detailed information on health and safety and precautions for using this product, please refer to our company's "Product Safety Data Sheet". |
| Physical state | White viscous liquid |
Product Application
It is suitable for coating different substrates such as interior walls and ceilings.
Product Features
♦ Moisture-proof
♦ Mildew-proof
♦ Bacteriostasis
♦ Silky
♦ Soft and shiny
Product Construction
Coating system and coating times
♦ Base surface treatment: remove dust, oil stains, cracks, etc. on the base surface, spray glue or interface agent to increase adhesion and alkali resistance.
♦ Putty scraping: Fill the uneven part of the wall with low alkaline putty, scrape twice horizontally and vertically alternately, and smooth it with sandpaper after scraping each time.
♦ Primer: Brush a layer with a special primer to increase coating strength and adhesion of the paint.
♦ Brush topcoat: according to the type and requirements of the paint, brush two to three topcoats, wait for drying between each layer, and refill putty and smooth.
Theoretical paint consumption
9.0-10 square meters/kg/single pass (dry film 30 microns), due to the roughness of the actual construction surface and the dilution ratio, the amount of paint consumption is also different.
Packaging specification
20KG
Storage method
Store in a cool and dry warehouse at 0°C-35°C, avoid rain and sun exposure, and strictly prevent frost. Avoid stacking too high.
Maintenance time
7 days/25°C, low temperature (not lower than 5°C) should be extended appropriately to obtain the ideal paint film effect.
Surface condition
The surface of the precoated substrate must be firm, dry, clean, smooth and free of loose matter.
Ensure that the surface humidity of the precoated substrate is less than 10% and the pH is less than 10.
Points to Attention
Construction and use suggestions
1. Carefully read the instructions for using this product before construction.
2. It is recommended to try it in a small area first, and if you have any questions, please consult on time before using it.
3. Avoid storage at low temperatures or exposure to sunlight.
4. Use according to product technical instructions.
Executive standard
This product fully complies with National/Industry Standards:
GB18582-2008 "Limits of Hazardous Substances in Adhesives for Interior Decoration Materials"
GB/T 9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings"
Product construction steps
Product Display
