2019 wholesale price Interior UV Resistance Acrylic Polymer Emulsion Wall Paint with Cheap Price
Bear “Customer first, High quality first” in mind, we perform closely with our consumers and provide them with efficient and experienced services for 2019 wholesale price Interior UV Resistance Acrylic Polymer Emulsion Wall Paint with Cheap Price, We sincerely hope to determine some satisfactory relationships with you while in the near potential. We’re going to preserve you informed of our progress and anticipate building steady company relations with you.
Bear “Customer first, High quality first” in mind, we perform closely with our consumers and provide them with efficient and experienced services for China Interior Wall Emulsion and Exterior Wall Emulsion, We believe in quality and customer satisfaction achieved by a team of highly dedicated individuals. The team of our company with the use of cutting-edge technologies delivers impeccable quality merchandise supremely adored and appreciated by our customers worldwide.
Product Parameter
| Ingredients | Water ,water-based deodorizing emulsion, environmental pigment,environmental additive |
| Viscosity | 117Pa.s |
| pH value | 7.5 |
| Water resistance | 5000 times |
| Theoretical coverage | 0.95 |
| Drying time | Surface dry in 2 hours, hard dry in about 24 hours. |
| Repainting time | 2 hours (based on dry film 30 microns, 25-30 ℃) |
| Solid content | 58% |
| Proportion | 1.3 |
| Country of origin | Made in China |
| Model NO. | BPR-1303 |
| Physical state | white viscous liquid |
Product Features
• Bacteriostatic
• Anti-mildew
• Easy to clean
Product Application
It is suitable for coating different substrates, such as interior walls and ceilings.
Product Construction
Tool Cleaning
Please use clean water to wash all utensils on time after stopping in the middle of painting and after painting.
Theoretical paint consumption
9.0-10 square meters/kg/single pass (dry film 30 microns), due to the roughness of the actual construction surface and the dilution ratio, the amount of paint consumption is also different.
Packaging specification
20KG
Storage method
Store in a cool and dry warehouse at 0°C-35°C, avoid rain and sun exposure, and strictly prevent frost. Avoid stacking too high.
Substrate treatment
When building a new wall, remove surface dust, greasy and loose plaster, and if there are pores, repair it in time to ensure that the wall is clean, dry and smooth.
First recoating the wall surface: eradicate the weak paint film on the old wall surface, remove the dust powder and impurities on the surface, flatten and polish it, clean it and dry it thoroughly.
Maintenance time
7 days/25°C, low temperature (not lower than 5°C) should be extended appropriately to obtain the ideal paint film effect.
Surface condition
The surface of the precoated substrate must be firm, dry, clean, smooth and free of loose matter.
Ensure that the surface humidity of the precoated substrate is less than 10% and the pH is less than 10.
Powdered surface
1. Remove the powdered coating from the surface as much as possible, and level it again with putty.
2. After the putty is dry, smooth with fine sandpaper and remove powder.
Moldy surface
1. Shovel with a spatula and sand with sandpaper to remove mildew.
2. Brush 1 time with appropriate mold washing water, and wash it with clean water in time, and let it dry completely.
Points to Attention
Construction and use suggestions
1. Carefully read the instructions for using this product before construction.
2. It is recommended to try it in a small area first, and if you have any questions, please consult on time before using it.
3. Avoid storage at low temperatures or exposure to sunlight.
4. Use according to product technical instructions.
Executive standard
This product fully complies with National/Industry Standards:
GB18582-2008 “Limits of Hazardous Substances in Adhesives for Interior Decoration Materials”
GB/T 9756-2018 “Synthetic Resin Emulsion Interior Wall Coatings”
Product construction steps
Product Display
Bear “Customer first, High quality first” in mind, we perform closely with our consumers and provide them with efficient and experienced services for 2019 wholesale price Interior UV Resistance Acrylic Polymer Emulsion Wall Paint with Cheap Price, We sincerely hope to determine some satisfactory relationships with you while in the near potential. We’re going to preserve you informed of our progress and anticipate building steady company relations with you.
2019 wholesale price China Interior Wall Emulsion and Exterior Wall Emulsion, We believe in quality and customer satisfaction achieved by a team of highly dedicated individuals. The team of our company with the use of cutting-edge technologies delivers impeccable quality merchandise supremely adored and appreciated by our customers worldwide.
